{"id":1168,"date":"2020-06-09T17:06:25","date_gmt":"2020-06-09T14:06:25","guid":{"rendered":"http:\/\/stekonair.com\/modular-floor-diffuser-displacement-pattern-mfd-dp\/"},"modified":"2021-06-28T22:20:50","modified_gmt":"2021-06-28T19:20:50","slug":"modular-floor-diffuser-displacement-pattern-mfd-dp","status":"publish","type":"page","link":"https:\/\/www.stekonair.com\/en\/price-industries-products\/modular-floor-diffuser-displacement-pattern-mfd-dp\/","title":{"rendered":"MODULAR FLOOR DIFFUSER – DISPLACEMENT PATTERN – MFD-DP"},"content":{"rendered":"

[vc_row full_width=”stretch_row”][vc_column width=”1\/2″]

<\/div>

MODULAR FLOOR D\u0130FFUSER - D\u0130SPLACEMENT PATTERN<\/h2><\/div>
MFD-DP<\/div><\/div>[vc_empty_space height=”20px”]
<\/div>
The Price MFD-DP\u00a0is ideal for use where low induction floor level flow is required. The diffuser slots discharge air in a displacement manner, horizontally across the floor, where it is drawn to heat loads and transports heat and contaminants up to the return grilles in the ceiling.
\nThese diffusers create a horizontal flow using narrow slots arranged in a star pattern with a perforated section in the center to resist induction of room air. This generates a low turbulence flow with low velocities to minimize draft when located near seated occupants. This low level discharge is ideal for supplying cool air across the floor of the room and allowing it to rise as the heat load from people and electrical equipment is absorbed. The 8″ (200 mm) diameter diffusers can be placed within 24″ (610 mm) of a seated occupant while maintaining a draft rate of less than 10% according to ASHRAE 55-2004.
\n\u2022 The MFD is an integral component of the ModuFlex System.
\n\u2022 Room side, drop-in installation allows for increased flexibility, and can be quickly installed or rearranged.
\n\u2022 One cable daisy change arrangement for controls.
\n\u2022 The MFD is tested in accordance with ASHRAE55. The low velocity displacement air pattern allows the Modular Floor Displacement Diffuser to be placed in the occupant space.
\n\u2022 The MFD allows a reduction in outdoor air required by at least 18% as per ASHRAE62.1.
\nFeatures
\n\u2022 Available with Manual and Automatic Air volume dampers
\n\u2022 Optimal low velocity displacement design, with a VE of 1.2
\n\u2022 Placement independent of occupant location
\n\u2022 Easy drop-in installation
\n<\/div><\/div>[vc_row_inner css=”.vc_custom_1576310671458{padding-top: 20px !important;padding-bottom: 20px !important;}”][vc_column_inner width=”1\/2″]